// Copyright (c) 2019, Paul Ferrand
// All rights reserved.

// Redistribution and use in source and binary forms, with or without
// modification, are permitted provided that the following conditions are met:

// 1. Redistributions of source code must retain the above copyright notice, this
//    list of conditions and the following disclaimer.
// 2. Redistributions in binary form must reproduce the above copyright notice,
//    this list of conditions and the following disclaimer in the documentation
//    and/or other materials provided with the distribution.

// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
// ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
// WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
// DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR
// ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
// (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
// LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
// ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
// (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
// SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

#include "../sources/Region.h"
#include "catch2/catch.hpp"
using namespace Catch::literals;

TEST_CASE("[Region] Parsing opcodes")
{
    sfz::Region region;
    SECTION("sample")
    {
        REQUIRE(region.sample == "");
        region.parseOpcode({ "sample", "dummy.wav" });
        REQUIRE(region.sample == "dummy.wav");
    }

    SECTION("delay")
    {
        REQUIRE(region.delay == 0.0);
        region.parseOpcode({ "delay", "1.0" });
        REQUIRE(region.delay == 1.0);
        region.parseOpcode({ "delay", "-1.0" });
        REQUIRE(region.delay == 0.0);
        region.parseOpcode({ "delay", "110.0" });
        REQUIRE(region.delay == 100.0);
    }

    SECTION("delay_random")
    {
        REQUIRE(region.delayRandom == 0.0);
        region.parseOpcode({ "delay_random", "1.0" });
        REQUIRE(region.delayRandom == 1.0);
        region.parseOpcode({ "delay_random", "-1.0" });
        REQUIRE(region.delayRandom == 0.0);
        region.parseOpcode({ "delay_random", "110.0" });
        REQUIRE(region.delayRandom == 100.0);
    }

    SECTION("offset")
    {
        REQUIRE(region.offset == 0);
        region.parseOpcode({ "offset", "1" });
        REQUIRE(region.offset == 1);
        region.parseOpcode({ "offset", "-1" });
        REQUIRE(region.offset == 0);
    }

    SECTION("offset_random")
    {
        REQUIRE(region.offsetRandom == 0);
        region.parseOpcode({ "offset_random", "1" });
        REQUIRE(region.offsetRandom == 1);
        region.parseOpcode({ "offset_random", "-1" });
        REQUIRE(region.offsetRandom == 0);
    }

    SECTION("end")
    {
        region.parseOpcode({ "end", "184" });
        REQUIRE(region.sampleEnd == 184);
        region.parseOpcode({ "end", "-1" });
        REQUIRE(region.sampleEnd == 0);
    }

    SECTION("count")
    {
        REQUIRE(!region.sampleCount);
        region.parseOpcode({ "count", "184" });
        REQUIRE(region.sampleCount);
        REQUIRE(*region.sampleCount == 184);
        region.parseOpcode({ "count", "-1" });
        REQUIRE(region.sampleCount);
        REQUIRE(*region.sampleCount == 0);
    }

    SECTION("loop_mode")
    {
        REQUIRE(region.loopMode == SfzLoopMode::no_loop);
        region.parseOpcode({ "loop_mode", "no_loop" });
        REQUIRE(region.loopMode == SfzLoopMode::no_loop);
        region.parseOpcode({ "loop_mode", "one_shot" });
        REQUIRE(region.loopMode == SfzLoopMode::one_shot);
        region.parseOpcode({ "loop_mode", "loop_continuous" });
        REQUIRE(region.loopMode == SfzLoopMode::loop_continuous);
        region.parseOpcode({ "loop_mode", "loop_sustain" });
        REQUIRE(region.loopMode == SfzLoopMode::loop_sustain);
    }

    SECTION("loopmode")
    {
        REQUIRE(region.loopMode == SfzLoopMode::no_loop);
        region.parseOpcode({ "loopmode", "no_loop" });
        REQUIRE(region.loopMode == SfzLoopMode::no_loop);
        region.parseOpcode({ "loopmode", "one_shot" });
        REQUIRE(region.loopMode == SfzLoopMode::one_shot);
        region.parseOpcode({ "loopmode", "loop_continuous" });
        REQUIRE(region.loopMode == SfzLoopMode::loop_continuous);
        region.parseOpcode({ "loopmode", "loop_sustain" });
        REQUIRE(region.loopMode == SfzLoopMode::loop_sustain);
    }

    SECTION("loop_end")
    {
        REQUIRE(region.loopRange == Range<uint32_t>(0, 4294967295));
        region.parseOpcode({ "loop_end", "184" });
        REQUIRE(region.loopRange == Range<uint32_t>(0, 184));
        region.parseOpcode({ "loop_end", "-1" });
        REQUIRE(region.loopRange == Range<uint32_t>(0, 0));
    }

    SECTION("loop_start")
    {
        region.parseOpcode({ "loop_start", "184" });
        REQUIRE(region.loopRange == Range<uint32_t>(184, 4294967295));
        region.parseOpcode({ "loop_start", "-1" });
        REQUIRE(region.loopRange == Range<uint32_t>(0, 4294967295));
    }

    SECTION("loopend")
    {
        REQUIRE(region.loopRange == Range<uint32_t>(0, 4294967295));
        region.parseOpcode({ "loopend", "184" });
        REQUIRE(region.loopRange == Range<uint32_t>(0, 184));
        region.parseOpcode({ "loopend", "-1" });
        REQUIRE(region.loopRange == Range<uint32_t>(0, 0));
    }

    SECTION("loopstart")
    {
        region.parseOpcode({ "loopstart", "184" });
        REQUIRE(region.loopRange == Range<uint32_t>(184, 4294967295));
        region.parseOpcode({ "loopstart", "-1" });
        REQUIRE(region.loopRange == Range<uint32_t>(0, 4294967295));
    }

    SECTION("group")
    {
        REQUIRE(region.group == 0);
        region.parseOpcode({ "group", "5" });
        REQUIRE(region.group == 5);
        region.parseOpcode({ "group", "-1" });
        REQUIRE(region.group == 0);
    }

    SECTION("off_by")
    {
        REQUIRE(!region.offBy);
        region.parseOpcode({ "off_by", "5" });
        REQUIRE(region.offBy);
        REQUIRE(region.offBy == 5);
        region.parseOpcode({ "off_by", "-1" });
        REQUIRE(region.offBy);
        REQUIRE(region.offBy == 0);
    }

    SECTION("off_mode")
    {
        REQUIRE(region.offMode == SfzOffMode::fast);
        region.parseOpcode({ "off_mode", "fast" });
        REQUIRE(region.offMode == SfzOffMode::fast);
        region.parseOpcode({ "off_mode", "normal" });
        REQUIRE(region.offMode == SfzOffMode::normal);
    }

    SECTION("lokey, hikey, and key")
    {
        REQUIRE(region.keyRange == Range<uint8_t>(0, 127));
        region.parseOpcode({ "lokey", "37" });
        REQUIRE(region.keyRange == Range<uint8_t>(37, 127));
        region.parseOpcode({ "lokey", "c4" });
        REQUIRE(region.keyRange == Range<uint8_t>(60, 127));
        region.parseOpcode({ "lokey", "128" });
        REQUIRE(region.keyRange == Range<uint8_t>(127, 127));
        region.parseOpcode({ "lokey", "-3" });
        REQUIRE(region.keyRange == Range<uint8_t>(0, 127));
        region.parseOpcode({ "hikey", "65" });
        REQUIRE(region.keyRange == Range<uint8_t>(0, 65));
        region.parseOpcode({ "hikey", "c4" });
        REQUIRE(region.keyRange == Range<uint8_t>(0, 60));
        region.parseOpcode({ "hikey", "-1" });
        REQUIRE(region.keyRange == Range<uint8_t>(0, 0));
        region.parseOpcode({ "hikey", "128" });
        REQUIRE(region.keyRange == Range<uint8_t>(0, 127));
        region.parseOpcode({ "key", "26" });
        REQUIRE(region.keyRange == Range<uint8_t>(26, 26));
        REQUIRE(region.pitchKeycenter == 26);
        region.parseOpcode({ "key", "-26" });
        REQUIRE(region.keyRange == Range<uint8_t>(0, 0));
        REQUIRE(region.pitchKeycenter == 0);
        region.parseOpcode({ "key", "234" });
        REQUIRE(region.keyRange == Range<uint8_t>(127, 127));
        REQUIRE(region.pitchKeycenter == 127);
        region.parseOpcode({ "key", "c4" });
        REQUIRE(region.keyRange == Range<uint8_t>(60, 60));
        REQUIRE(region.pitchKeycenter == 60);
    }

    SECTION("lovel, hivel")
    {
        REQUIRE(region.velocityRange == Range<uint8_t>(0, 127));
        region.parseOpcode({ "lovel", "37" });
        REQUIRE(region.velocityRange == Range<uint8_t>(37, 127));
        region.parseOpcode({ "lovel", "128" });
        REQUIRE(region.velocityRange == Range<uint8_t>(127, 127));
        region.parseOpcode({ "lovel", "-3" });
        REQUIRE(region.velocityRange == Range<uint8_t>(0, 127));
        region.parseOpcode({ "hivel", "65" });
        REQUIRE(region.velocityRange == Range<uint8_t>(0, 65));
        region.parseOpcode({ "hivel", "-1" });
        REQUIRE(region.velocityRange == Range<uint8_t>(0, 0));
        region.parseOpcode({ "hivel", "128" });
        REQUIRE(region.velocityRange == Range<uint8_t>(0, 127));
    }

    SECTION("lochan, hichan")
    {
        REQUIRE(region.channelRange == Range<uint8_t>(1, 16));
        region.parseOpcode({ "lochan", "4" });
        REQUIRE(region.channelRange == Range<uint8_t>(4, 16));
        region.parseOpcode({ "lochan", "128" });
        REQUIRE(region.channelRange == Range<uint8_t>(16, 16));
        region.parseOpcode({ "lochan", "-3" });
        REQUIRE(region.channelRange == Range<uint8_t>(1, 16));
        region.parseOpcode({ "hichan", "13" });
        REQUIRE(region.channelRange == Range<uint8_t>(1, 13));
        region.parseOpcode({ "hichan", "-1" });
        REQUIRE(region.channelRange == Range<uint8_t>(1, 1));
        region.parseOpcode({ "hichan", "128" });
        REQUIRE(region.channelRange == Range<uint8_t>(1, 16));
    }

    SECTION("lobend, hibend")
    {
        REQUIRE(region.bendRange == Range<int>(-8192, 8192));
        region.parseOpcode({ "lobend", "4" });
        REQUIRE(region.bendRange == Range<int>(4, 8192));
        region.parseOpcode({ "lobend", "-128" });
        REQUIRE(region.bendRange == Range<int>(-128, 8192));
        region.parseOpcode({ "lobend", "-10000" });
        REQUIRE(region.bendRange == Range<int>(-8192, 8192));
        region.parseOpcode({ "hibend", "13" });
        REQUIRE(region.bendRange == Range<int>(-8192, 13));
        region.parseOpcode({ "hibend", "-1" });
        REQUIRE(region.bendRange == Range<int>(-8192, -1));
        region.parseOpcode({ "hibend", "10000" });
        REQUIRE(region.bendRange == Range<int>(-8192, 8192));
    }

    SECTION("locc, hicc")
    {
        REQUIRE(region.ccConditions.getWithDefault(0) == Range<uint8_t>(0, 127));
        REQUIRE(region.ccConditions[127] == Range<uint8_t>(0, 127));
        region.parseOpcode({ "locc6", "4" });
        REQUIRE(region.ccConditions[6] == Range<uint8_t>(4, 127));
        region.parseOpcode({ "locc12", "-128" });
        REQUIRE(region.ccConditions[12] == Range<uint8_t>(0, 127));
        region.parseOpcode({ "hicc65", "39" });
        REQUIRE(region.ccConditions[65] == Range<uint8_t>(0, 39));
        region.parseOpcode({ "hicc127", "135" });
        REQUIRE(region.ccConditions[127] == Range<uint8_t>(0, 127));
    }

    SECTION("sw_lokey, sw_hikey")
    {
        REQUIRE(region.keyswitchRange == Range<uint8_t>(0, 127));
        region.parseOpcode({ "sw_lokey", "4" });
        REQUIRE(region.keyswitchRange == Range<uint8_t>(4, 127));
        region.parseOpcode({ "sw_lokey", "128" });
        REQUIRE(region.keyswitchRange == Range<uint8_t>(127, 127));
        region.parseOpcode({ "sw_lokey", "0" });
        REQUIRE(region.keyswitchRange == Range<uint8_t>(0, 127));
        region.parseOpcode({ "sw_hikey", "39" });
        REQUIRE(region.keyswitchRange == Range<uint8_t>(0, 39));
        region.parseOpcode({ "sw_hikey", "135" });
        REQUIRE(region.keyswitchRange == Range<uint8_t>(0, 127));
        region.parseOpcode({ "sw_hikey", "-1" });
        REQUIRE(region.keyswitchRange == Range<uint8_t>(0, 0));
    }

    SECTION("sw_last")
    {
        REQUIRE(!region.keyswitch);
        region.parseOpcode({ "sw_last", "4" });
        REQUIRE(region.keyswitch);
        REQUIRE(*region.keyswitch == 4);
        region.parseOpcode({ "sw_last", "128" });
        REQUIRE(region.keyswitch);
        REQUIRE(*region.keyswitch == 127);
        region.parseOpcode({ "sw_last", "-1" });
        REQUIRE(region.keyswitch);
        REQUIRE(*region.keyswitch == 0);
    }

    SECTION("sw_up")
    {
        REQUIRE(!region.keyswitchUp);
        region.parseOpcode({ "sw_up", "4" });
        REQUIRE(region.keyswitchUp);
        REQUIRE(*region.keyswitchUp == 4);
        region.parseOpcode({ "sw_up", "128" });
        REQUIRE(region.keyswitchUp);
        REQUIRE(*region.keyswitchUp == 127);
        region.parseOpcode({ "sw_up", "-1" });
        REQUIRE(region.keyswitchUp);
        REQUIRE(*region.keyswitchUp == 0);
    }

    SECTION("sw_down")
    {
        REQUIRE(!region.keyswitchDown);
        region.parseOpcode({ "sw_down", "4" });
        REQUIRE(region.keyswitchDown);
        REQUIRE(*region.keyswitchDown == 4);
        region.parseOpcode({ "sw_down", "128" });
        REQUIRE(region.keyswitchDown);
        REQUIRE(*region.keyswitchDown == 127);
        region.parseOpcode({ "sw_down", "-1" });
        REQUIRE(region.keyswitchDown);
        REQUIRE(*region.keyswitchDown == 0);
    }

    SECTION("sw_previous")
    {
        REQUIRE(!region.previousNote);
        region.parseOpcode({ "sw_previous", "4" });
        REQUIRE(region.previousNote);
        REQUIRE(*region.previousNote == 4);
        region.parseOpcode({ "sw_previous", "128" });
        REQUIRE(region.previousNote);
        REQUIRE(*region.previousNote == 127);
        region.parseOpcode({ "sw_previous", "-1" });
        REQUIRE(region.previousNote);
        REQUIRE(*region.previousNote == 0);
    }

    SECTION("sw_vel")
    {
        REQUIRE(region.velocityOverride == SfzVelocityOverride::current);
        region.parseOpcode({ "sw_vel", "current" });
        REQUIRE(region.velocityOverride == SfzVelocityOverride::current);
        region.parseOpcode({ "sw_vel", "previous" });
        REQUIRE(region.velocityOverride == SfzVelocityOverride::previous);
    }

    SECTION("lochanaft, hichanaft")
    {
        REQUIRE(region.aftertouchRange == Range<uint8_t>(0, 127));
        region.parseOpcode({ "lochanaft", "4" });
        REQUIRE(region.aftertouchRange == Range<uint8_t>(4, 127));
        region.parseOpcode({ "lochanaft", "128" });
        REQUIRE(region.aftertouchRange == Range<uint8_t>(127, 127));
        region.parseOpcode({ "lochanaft", "0" });
        REQUIRE(region.aftertouchRange == Range<uint8_t>(0, 127));
        region.parseOpcode({ "hichanaft", "39" });
        REQUIRE(region.aftertouchRange == Range<uint8_t>(0, 39));
        region.parseOpcode({ "hichanaft", "135" });
        REQUIRE(region.aftertouchRange == Range<uint8_t>(0, 127));
        region.parseOpcode({ "hichanaft", "-1" });
        REQUIRE(region.aftertouchRange == Range<uint8_t>(0, 0));
    }

    SECTION("lobpm, hibpm")
    {
        REQUIRE(region.bpmRange == Range<float>(0, 500));
        region.parseOpcode({ "lobpm", "47.5" });
        REQUIRE(region.bpmRange == Range<float>(47.5, 500));
        region.parseOpcode({ "lobpm", "594" });
        REQUIRE(region.bpmRange == Range<float>(500, 500));
        region.parseOpcode({ "lobpm", "0" });
        REQUIRE(region.bpmRange == Range<float>(0, 500));
        region.parseOpcode({ "hibpm", "78" });
        REQUIRE(region.bpmRange == Range<float>(0, 78));
        region.parseOpcode({ "hibpm", "895.4" });
        REQUIRE(region.bpmRange == Range<float>(0, 500));
        region.parseOpcode({ "hibpm", "-1" });
        REQUIRE(region.bpmRange == Range<float>(0, 0));
    }

    SECTION("lorand, hirand")
    {
        REQUIRE(region.randRange == Range<float>(0, 1));
        region.parseOpcode({ "lorand", "0.5" });
        REQUIRE(region.randRange == Range<float>(0.5, 1));
        region.parseOpcode({ "lorand", "4" });
        REQUIRE(region.randRange == Range<float>(1, 1));
        region.parseOpcode({ "lorand", "0" });
        REQUIRE(region.randRange == Range<float>(0, 1));
        region.parseOpcode({ "hirand", "39" });
        REQUIRE(region.randRange == Range<float>(0, 1));
        region.parseOpcode({ "hirand", "0.7" });
        REQUIRE(region.randRange == Range<float>(0, 0.7f));
        region.parseOpcode({ "hirand", "-1" });
        REQUIRE(region.randRange == Range<float>(0, 0));
    }

    SECTION("seq_length")
    {
        REQUIRE(region.sequenceLength == 1);
        region.parseOpcode({ "seq_length", "89" });
        REQUIRE(region.sequenceLength == 89);
        region.parseOpcode({ "seq_length", "189" });
        REQUIRE(region.sequenceLength == 100);
        region.parseOpcode({ "seq_length", "-1" });
        REQUIRE(region.sequenceLength == 1);
    }

    SECTION("seq_position")
    {
        REQUIRE(region.sequencePosition == 1);
        region.parseOpcode({ "seq_position", "89" });
        REQUIRE(region.sequencePosition == 89);
        region.parseOpcode({ "seq_position", "189" });
        REQUIRE(region.sequencePosition == 100);
        region.parseOpcode({ "seq_position", "-1" });
        REQUIRE(region.sequencePosition == 1);
    }

    SECTION("trigger")
    {
        REQUIRE(region.trigger == SfzTrigger::attack);
        region.parseOpcode({ "trigger", "attack" });
        REQUIRE(region.trigger == SfzTrigger::attack);
        region.parseOpcode({ "trigger", "release" });
        REQUIRE(region.trigger == SfzTrigger::release);
        region.parseOpcode({ "trigger", "first" });
        REQUIRE(region.trigger == SfzTrigger::first);
        region.parseOpcode({ "trigger", "legato" });
        REQUIRE(region.trigger == SfzTrigger::legato);
    }

    SECTION("on_locc, on_hicc")
    {
        for (int ccIdx = 1; ccIdx < 128; ++ccIdx) {
            REQUIRE(!region.ccTriggers.contains(ccIdx));
        }
        region.parseOpcode({ "on_locc45", "15" });
        REQUIRE(region.ccTriggers.contains(45));
        REQUIRE(region.ccTriggers[45] == Range<uint8_t>(15, 127));
        region.parseOpcode({ "on_hicc4", "47" });
        REQUIRE(region.ccTriggers.contains(45));
        REQUIRE(region.ccTriggers[4] == Range<uint8_t>(0, 47));
    }

    SECTION("volume")
    {
        REQUIRE(region.volume == -3.0f);
        region.parseOpcode({ "volume", "4.2" });
        REQUIRE(region.volume == 4.2f);
        region.parseOpcode({ "volume", "-4.2" });
        REQUIRE(region.volume == -4.2f);
        region.parseOpcode({ "volume", "-123" });
        REQUIRE(region.volume == -123.0f);
        region.parseOpcode({ "volume", "-185" });
        REQUIRE(region.volume == -144.0f);
        region.parseOpcode({ "volume", "19" });
        REQUIRE(region.volume == 6.0f);
    }

    SECTION("pan")
    {
        REQUIRE(region.pan == 0.0f);
        region.parseOpcode({ "pan", "4.2" });
        REQUIRE(region.pan == 4.2f);
        region.parseOpcode({ "pan", "-4.2" });
        REQUIRE(region.pan == -4.2f);
        region.parseOpcode({ "pan", "-123" });
        REQUIRE(region.pan == -100.0f);
        region.parseOpcode({ "pan", "132" });
        REQUIRE(region.pan == 100.0f);
    }

    SECTION("pan_oncc")
    {
        REQUIRE(!region.panCC);
        region.parseOpcode({ "pan_oncc45", "4.2" });
        REQUIRE(region.panCC);
        REQUIRE(region.panCC->first == 45);
        REQUIRE(region.panCC->second == 4.2f);
    }

    SECTION("width")
    {
        REQUIRE(region.width == 0.0f);
        region.parseOpcode({ "width", "4.2" });
        REQUIRE(region.width == 4.2f);
        region.parseOpcode({ "width", "-4.2" });
        REQUIRE(region.width == -4.2f);
        region.parseOpcode({ "width", "-123" });
        REQUIRE(region.width == -100.0f);
        region.parseOpcode({ "width", "132" });
        REQUIRE(region.width == 100.0f);
    }

    SECTION("width_oncc")
    {
        REQUIRE(!region.widthCC);
        region.parseOpcode({ "width_oncc45", "4.2" });
        REQUIRE(region.widthCC);
        REQUIRE(region.widthCC->first == 45);
        REQUIRE(region.widthCC->second == 4.2f);
    }

    SECTION("position")
    {
        REQUIRE(region.position == 0.0f);
        region.parseOpcode({ "position", "4.2" });
        REQUIRE(region.position == 4.2f);
        region.parseOpcode({ "position", "-4.2" });
        REQUIRE(region.position == -4.2f);
        region.parseOpcode({ "position", "-123" });
        REQUIRE(region.position == -100.0f);
        region.parseOpcode({ "position", "132" });
        REQUIRE(region.position == 100.0f);
    }

    SECTION("position_oncc")
    {
        REQUIRE(!region.positionCC);
        region.parseOpcode({ "position_oncc45", "4.2" });
        REQUIRE(region.positionCC);
        REQUIRE(region.positionCC->first == 45);
        REQUIRE(region.positionCC->second == 4.2f);
    }

    SECTION("amp_keycenter")
    {
        REQUIRE(region.ampKeycenter == 60);
        region.parseOpcode({ "amp_keycenter", "40" });
        REQUIRE(region.ampKeycenter == 40);
        region.parseOpcode({ "amp_keycenter", "-1" });
        REQUIRE(region.ampKeycenter == 0);
        region.parseOpcode({ "amp_keycenter", "132" });
        REQUIRE(region.ampKeycenter == 127);
    }

    SECTION("amp_keytrack")
    {
        REQUIRE(region.ampKeytrack == 0.0f);
        region.parseOpcode({ "amp_keytrack", "4.2" });
        REQUIRE(region.ampKeytrack == 4.2f);
        region.parseOpcode({ "amp_keytrack", "-4.2" });
        REQUIRE(region.ampKeytrack == -4.2f);
        region.parseOpcode({ "amp_keytrack", "-123" });
        REQUIRE(region.ampKeytrack == -96.0f);
        region.parseOpcode({ "amp_keytrack", "132" });
        REQUIRE(region.ampKeytrack == 12.0f);
    }

    SECTION("amp_veltrack")
    {
        REQUIRE(region.ampVeltrack == 100.0f);
        region.parseOpcode({ "amp_veltrack", "4.2" });
        REQUIRE(region.ampVeltrack == 4.2f);
        region.parseOpcode({ "amp_veltrack", "-4.2" });
        REQUIRE(region.ampVeltrack == -4.2f);
        region.parseOpcode({ "amp_veltrack", "-123" });
        REQUIRE(region.ampVeltrack == -100.0f);
        region.parseOpcode({ "amp_veltrack", "132" });
        REQUIRE(region.ampVeltrack == 100.0f);
    }

    SECTION("amp_random")
    {
        REQUIRE(region.ampRandom == 0.0f);
        region.parseOpcode({ "amp_random", "4.2" });
        REQUIRE(region.ampRandom == 4.2f);
        region.parseOpcode({ "amp_random", "-4.2" });
        REQUIRE(region.ampRandom == 0.0f);
        region.parseOpcode({ "amp_random", "132" });
        REQUIRE(region.ampRandom == 24.0f);
    }

    SECTION("amp_velcurve")
    {
        region.parseOpcode({ "amp_velcurve_6", "0.4" });
        REQUIRE(region.velocityPoints.back() == std::make_pair<int, float>(6, 0.4f));
        region.parseOpcode({ "amp_velcurve_127", "-1.0" });
        REQUIRE(region.velocityPoints.back() == std::make_pair<int, float>(127, 0.0f));
    }

    SECTION("xfin_lokey, xfin_hikey")
    {
        REQUIRE(region.crossfadeKeyInRange == Range<uint8_t>(0, 0));
        region.parseOpcode({ "xfin_lokey", "4" });
        REQUIRE(region.crossfadeKeyInRange == Range<uint8_t>(4, 4));
        region.parseOpcode({ "xfin_lokey", "128" });
        REQUIRE(region.crossfadeKeyInRange == Range<uint8_t>(127, 127));
        region.parseOpcode({ "xfin_lokey", "59" });
        REQUIRE(region.crossfadeKeyInRange == Range<uint8_t>(59, 127));
        region.parseOpcode({ "xfin_hikey", "59" });
        REQUIRE(region.crossfadeKeyInRange == Range<uint8_t>(59, 59));
        region.parseOpcode({ "xfin_hikey", "128" });
        REQUIRE(region.crossfadeKeyInRange == Range<uint8_t>(59, 127));
        region.parseOpcode({ "xfin_hikey", "0" });
        REQUIRE(region.crossfadeKeyInRange == Range<uint8_t>(0, 0));
        region.parseOpcode({ "xfin_hikey", "-1" });
        REQUIRE(region.crossfadeKeyInRange == Range<uint8_t>(0, 0));
    }

    SECTION("xfin_lovel, xfin_hivel")
    {
        REQUIRE(region.crossfadeVelInRange == Range<uint8_t>(0, 0));
        region.parseOpcode({ "xfin_lovel", "4" });
        REQUIRE(region.crossfadeVelInRange == Range<uint8_t>(4, 4));
        region.parseOpcode({ "xfin_lovel", "128" });
        REQUIRE(region.crossfadeVelInRange == Range<uint8_t>(127, 127));
        region.parseOpcode({ "xfin_lovel", "59" });
        REQUIRE(region.crossfadeVelInRange == Range<uint8_t>(59, 127));
        region.parseOpcode({ "xfin_hivel", "59" });
        REQUIRE(region.crossfadeVelInRange == Range<uint8_t>(59, 59));
        region.parseOpcode({ "xfin_hivel", "128" });
        REQUIRE(region.crossfadeVelInRange == Range<uint8_t>(59, 127));
        region.parseOpcode({ "xfin_hivel", "0" });
        REQUIRE(region.crossfadeVelInRange == Range<uint8_t>(0, 0));
        region.parseOpcode({ "xfin_hivel", "-1" });
        REQUIRE(region.crossfadeVelInRange == Range<uint8_t>(0, 0));
    }

    SECTION("xfout_lokey, xfout_hikey")
    {
        REQUIRE(region.crossfadeKeyOutRange == Range<uint8_t>(127, 127));
        region.parseOpcode({ "xfout_lokey", "4" });
        REQUIRE(region.crossfadeKeyOutRange == Range<uint8_t>(4, 127));
        region.parseOpcode({ "xfout_lokey", "128" });
        REQUIRE(region.crossfadeKeyOutRange == Range<uint8_t>(127, 127));
        region.parseOpcode({ "xfout_lokey", "59" });
        REQUIRE(region.crossfadeKeyOutRange == Range<uint8_t>(59, 127));
        region.parseOpcode({ "xfout_hikey", "59" });
        REQUIRE(region.crossfadeKeyOutRange == Range<uint8_t>(59, 59));
        region.parseOpcode({ "xfout_hikey", "128" });
        REQUIRE(region.crossfadeKeyOutRange == Range<uint8_t>(59, 127));
        region.parseOpcode({ "xfout_hikey", "0" });
        REQUIRE(region.crossfadeKeyOutRange == Range<uint8_t>(0, 0));
        region.parseOpcode({ "xfout_hikey", "-1" });
        REQUIRE(region.crossfadeKeyOutRange == Range<uint8_t>(0, 0));
    }

    SECTION("xfout_lovel, xfout_hivel")
    {
        REQUIRE(region.crossfadeVelOutRange == Range<uint8_t>(127, 127));
        region.parseOpcode({ "xfout_lovel", "4" });
        REQUIRE(region.crossfadeVelOutRange == Range<uint8_t>(4, 127));
        region.parseOpcode({ "xfout_lovel", "128" });
        REQUIRE(region.crossfadeVelOutRange == Range<uint8_t>(127, 127));
        region.parseOpcode({ "xfout_lovel", "59" });
        REQUIRE(region.crossfadeVelOutRange == Range<uint8_t>(59, 127));
        region.parseOpcode({ "xfout_hivel", "59" });
        REQUIRE(region.crossfadeVelOutRange == Range<uint8_t>(59, 59));
        region.parseOpcode({ "xfout_hivel", "128" });
        REQUIRE(region.crossfadeVelOutRange == Range<uint8_t>(59, 127));
        region.parseOpcode({ "xfout_hivel", "0" });
        REQUIRE(region.crossfadeVelOutRange == Range<uint8_t>(0, 0));
        region.parseOpcode({ "xfout_hivel", "-1" });
        REQUIRE(region.crossfadeVelOutRange == Range<uint8_t>(0, 0));
    }

    SECTION("xfin_locc, xfin_hicc")
    {
        REQUIRE(!region.crossfadeCCInRange.contains(4));
        region.parseOpcode({ "xfin_locc4", "4" });
        REQUIRE(region.crossfadeCCInRange[4] == Range<uint8_t>(4, 4));
        region.parseOpcode({ "xfin_locc4", "128" });
        REQUIRE(region.crossfadeCCInRange[4] == Range<uint8_t>(127, 127));
        region.parseOpcode({ "xfin_locc4", "59" });
        REQUIRE(region.crossfadeCCInRange[4] == Range<uint8_t>(59, 127));
        region.parseOpcode({ "xfin_hicc4", "59" });
        REQUIRE(region.crossfadeCCInRange[4] == Range<uint8_t>(59, 59));
        region.parseOpcode({ "xfin_hicc4", "128" });
        REQUIRE(region.crossfadeCCInRange[4] == Range<uint8_t>(59, 127));
        region.parseOpcode({ "xfin_hicc4", "0" });
        REQUIRE(region.crossfadeCCInRange[4] == Range<uint8_t>(0, 0));
        region.parseOpcode({ "xfin_hicc4", "-1" });
        REQUIRE(region.crossfadeCCInRange[4] == Range<uint8_t>(0, 0));
    }

    SECTION("xfout_locc, xfout_hicc")
    {
        REQUIRE(!region.crossfadeCCOutRange.contains(4));
        region.parseOpcode({ "xfout_locc4", "4" });
        REQUIRE(region.crossfadeCCOutRange[4] == Range<uint8_t>(4, 127));
        region.parseOpcode({ "xfout_locc4", "128" });
        REQUIRE(region.crossfadeCCOutRange[4] == Range<uint8_t>(127, 127));
        region.parseOpcode({ "xfout_locc4", "59" });
        REQUIRE(region.crossfadeCCOutRange[4] == Range<uint8_t>(59, 127));
        region.parseOpcode({ "xfout_hicc4", "59" });
        REQUIRE(region.crossfadeCCOutRange[4] == Range<uint8_t>(59, 59));
        region.parseOpcode({ "xfout_hicc4", "128" });
        REQUIRE(region.crossfadeCCOutRange[4] == Range<uint8_t>(59, 127));
        region.parseOpcode({ "xfout_hicc4", "0" });
        REQUIRE(region.crossfadeCCOutRange[4] == Range<uint8_t>(0, 0));
        region.parseOpcode({ "xfout_hicc4", "-1" });
        REQUIRE(region.crossfadeCCOutRange[4] == Range<uint8_t>(0, 0));
    }

    SECTION("xf_keycurve")
    {
        REQUIRE(region.crossfadeKeyCurve == SfzCrossfadeCurve::power);
        region.parseOpcode({ "xf_keycurve", "gain" });
        REQUIRE(region.crossfadeKeyCurve == SfzCrossfadeCurve::gain);
        region.parseOpcode({ "xf_keycurve", "power" });
        REQUIRE(region.crossfadeKeyCurve == SfzCrossfadeCurve::power);
        region.parseOpcode({ "xf_keycurve", "something" });
        REQUIRE(region.crossfadeKeyCurve == SfzCrossfadeCurve::power);
        region.parseOpcode({ "xf_keycurve", "gain" });
        region.parseOpcode({ "xf_keycurve", "something" });
        REQUIRE(region.crossfadeKeyCurve == SfzCrossfadeCurve::gain);
    }

    SECTION("xf_velcurve")
    {
        REQUIRE(region.crossfadeVelCurve == SfzCrossfadeCurve::power);
        region.parseOpcode({ "xf_velcurve", "gain" });
        REQUIRE(region.crossfadeVelCurve == SfzCrossfadeCurve::gain);
        region.parseOpcode({ "xf_velcurve", "power" });
        REQUIRE(region.crossfadeVelCurve == SfzCrossfadeCurve::power);
        region.parseOpcode({ "xf_velcurve", "something" });
        REQUIRE(region.crossfadeVelCurve == SfzCrossfadeCurve::power);
        region.parseOpcode({ "xf_velcurve", "gain" });
        region.parseOpcode({ "xf_velcurve", "something" });
        REQUIRE(region.crossfadeVelCurve == SfzCrossfadeCurve::gain);
    }

    SECTION("xf_cccurve")
    {
        REQUIRE(region.crossfadeCCCurve == SfzCrossfadeCurve::power);
        region.parseOpcode({ "xf_cccurve", "gain" });
        REQUIRE(region.crossfadeCCCurve == SfzCrossfadeCurve::gain);
        region.parseOpcode({ "xf_cccurve", "power" });
        REQUIRE(region.crossfadeCCCurve == SfzCrossfadeCurve::power);
        region.parseOpcode({ "xf_cccurve", "something" });
        REQUIRE(region.crossfadeCCCurve == SfzCrossfadeCurve::power);
        region.parseOpcode({ "xf_cccurve", "gain" });
        region.parseOpcode({ "xf_cccurve", "something" });
        REQUIRE(region.crossfadeCCCurve == SfzCrossfadeCurve::gain);
    }

    SECTION("pitch_keycenter")
    {
        REQUIRE(region.pitchKeycenter == 60);
        region.parseOpcode({ "pitch_keycenter", "40" });
        REQUIRE(region.pitchKeycenter == 40);
        region.parseOpcode({ "pitch_keycenter", "-1" });
        REQUIRE(region.pitchKeycenter == 0);
        region.parseOpcode({ "pitch_keycenter", "132" });
        REQUIRE(region.pitchKeycenter == 127);
    }

    SECTION("pitch_keytrack")
    {
        REQUIRE(region.pitchKeytrack == 100);
        region.parseOpcode({ "pitch_keytrack", "40" });
        REQUIRE(region.pitchKeytrack == 40);
        region.parseOpcode({ "pitch_keytrack", "-1" });
        REQUIRE(region.pitchKeytrack == -1);
        region.parseOpcode({ "pitch_keytrack", "1320" });
        REQUIRE(region.pitchKeytrack == 1200);
        region.parseOpcode({ "pitch_keytrack", "-1320" });
        REQUIRE(region.pitchKeytrack == -1200);
    }

    SECTION("pitch_random")
    {
        REQUIRE(region.pitchRandom == 0);
        region.parseOpcode({ "pitch_random", "40" });
        REQUIRE(region.pitchRandom == 40);
        region.parseOpcode({ "pitch_random", "-1" });
        REQUIRE(region.pitchRandom == 0);
        region.parseOpcode({ "pitch_random", "10320" });
        REQUIRE(region.pitchRandom == 9600);
    }

    SECTION("pitch_veltrack")
    {
        REQUIRE(region.pitchVeltrack == 0);
        region.parseOpcode({ "pitch_veltrack", "40" });
        REQUIRE(region.pitchVeltrack == 40);
        region.parseOpcode({ "pitch_veltrack", "-1" });
        REQUIRE(region.pitchVeltrack == -1);
        region.parseOpcode({ "pitch_veltrack", "13020" });
        REQUIRE(region.pitchVeltrack == 9600);
        region.parseOpcode({ "pitch_veltrack", "-13020" });
        REQUIRE(region.pitchVeltrack == -9600);
    }

    SECTION("transpose")
    {
        REQUIRE(region.transpose == 0);
        region.parseOpcode({ "transpose", "40" });
        REQUIRE(region.transpose == 40);
        region.parseOpcode({ "transpose", "-1" });
        REQUIRE(region.transpose == -1);
        region.parseOpcode({ "transpose", "154" });
        REQUIRE(region.transpose == 127);
        region.parseOpcode({ "transpose", "-154" });
        REQUIRE(region.transpose == -127);
    }

    SECTION("tune")
    {
        REQUIRE(region.tune == 0);
        region.parseOpcode({ "tune", "40" });
        REQUIRE(region.tune == 40);
        region.parseOpcode({ "tune", "-1" });
        REQUIRE(region.tune == -1);
        region.parseOpcode({ "tune", "154" });
        REQUIRE(region.tune == 100);
        region.parseOpcode({ "tune", "-154" });
        REQUIRE(region.tune == -100);
    }

    SECTION("ampeg")
    {
        // Defaults
        REQUIRE(region.amplitudeEG.attack == 0.0f);
        REQUIRE(region.amplitudeEG.decay == 0.0f);
        REQUIRE(region.amplitudeEG.delay == 0.0f);
        REQUIRE(region.amplitudeEG.hold == 0.0f);
        REQUIRE(region.amplitudeEG.release == 0.0f);
        REQUIRE(region.amplitudeEG.start == 0.0f);
        REQUIRE(region.amplitudeEG.sustain == 100.0f);
        REQUIRE(region.amplitudeEG.depth == 0);
        REQUIRE(region.amplitudeEG.vel2attack == 0.0f);
        REQUIRE(region.amplitudeEG.vel2decay == 0.0f);
        REQUIRE(region.amplitudeEG.vel2delay == 0.0f);
        REQUIRE(region.amplitudeEG.vel2hold == 0.0f);
        REQUIRE(region.amplitudeEG.vel2release == 0.0f);
        REQUIRE(region.amplitudeEG.vel2sustain == 0.0f);
        REQUIRE(region.amplitudeEG.vel2depth == 0);
        //
        region.parseOpcode({ "ampeg_attack", "1" });
        region.parseOpcode({ "ampeg_decay", "2" });
        region.parseOpcode({ "ampeg_delay", "3" });
        region.parseOpcode({ "ampeg_hold", "4" });
        region.parseOpcode({ "ampeg_release", "5" });
        region.parseOpcode({ "ampeg_start", "6" });
        region.parseOpcode({ "ampeg_sustain", "7" });
        region.parseOpcode({ "ampeg_depth", "8" });
        region.parseOpcode({ "ampeg_vel2attack", "9" });
        region.parseOpcode({ "ampeg_vel2decay", "10" });
        region.parseOpcode({ "ampeg_vel2delay", "11" });
        region.parseOpcode({ "ampeg_vel2hold", "12" });
        region.parseOpcode({ "ampeg_vel2release", "13" });
        region.parseOpcode({ "ampeg_vel2sustain", "14" });
        region.parseOpcode({ "ampeg_vel2depth", "15" });
        REQUIRE(region.amplitudeEG.attack == 1.0f);
        REQUIRE(region.amplitudeEG.decay == 2.0f);
        REQUIRE(region.amplitudeEG.delay == 3.0f);
        REQUIRE(region.amplitudeEG.hold == 4.0f);
        REQUIRE(region.amplitudeEG.release == 5.0f);
        REQUIRE(region.amplitudeEG.start == 6.0f);
        REQUIRE(region.amplitudeEG.sustain == 7.0f);
        REQUIRE(region.amplitudeEG.depth == 0); // ignored for ampeg
        REQUIRE(region.amplitudeEG.vel2attack == 9.0f);
        REQUIRE(region.amplitudeEG.vel2decay == 10.0f);
        REQUIRE(region.amplitudeEG.vel2delay == 11.0f);
        REQUIRE(region.amplitudeEG.vel2hold == 12.0f);
        REQUIRE(region.amplitudeEG.vel2release == 13.0f);
        REQUIRE(region.amplitudeEG.vel2sustain == 14.0f);
        REQUIRE(region.amplitudeEG.vel2depth == 0); // ignored for ampeg
        //
        region.parseOpcode({ "ampeg_attack", "1000" });
        region.parseOpcode({ "ampeg_decay", "1000" });
        region.parseOpcode({ "ampeg_delay", "1000" });
        region.parseOpcode({ "ampeg_hold", "1000" });
        region.parseOpcode({ "ampeg_release", "1000" });
        region.parseOpcode({ "ampeg_start", "1000" });
        region.parseOpcode({ "ampeg_sustain", "1000" });
        region.parseOpcode({ "ampeg_depth", "1000" });
        region.parseOpcode({ "ampeg_vel2attack", "1000" });
        region.parseOpcode({ "ampeg_vel2decay", "1000" });
        region.parseOpcode({ "ampeg_vel2delay", "1000" });
        region.parseOpcode({ "ampeg_vel2hold", "1000" });
        region.parseOpcode({ "ampeg_vel2release", "1000" });
        region.parseOpcode({ "ampeg_vel2sustain", "1000" });
        region.parseOpcode({ "ampeg_vel2depth", "1000" });
        REQUIRE(region.amplitudeEG.attack == 100.0f);
        REQUIRE(region.amplitudeEG.decay == 100.0f);
        REQUIRE(region.amplitudeEG.delay == 100.0f);
        REQUIRE(region.amplitudeEG.hold == 100.0f);
        REQUIRE(region.amplitudeEG.release == 100.0f);
        REQUIRE(region.amplitudeEG.start == 100.0f);
        REQUIRE(region.amplitudeEG.sustain == 100.0f);
        REQUIRE(region.amplitudeEG.depth == 0); // ignored for ampeg
        REQUIRE(region.amplitudeEG.vel2attack == 100.0f);
        REQUIRE(region.amplitudeEG.vel2decay == 100.0f);
        REQUIRE(region.amplitudeEG.vel2delay == 100.0f);
        REQUIRE(region.amplitudeEG.vel2hold == 100.0f);
        REQUIRE(region.amplitudeEG.vel2release == 100.0f);
        REQUIRE(region.amplitudeEG.vel2sustain == 100.0f);
        REQUIRE(region.amplitudeEG.vel2depth == 0); // ignored for ampeg
        //
        region.parseOpcode({ "ampeg_attack", "-101" });
        region.parseOpcode({ "ampeg_decay", "-101" });
        region.parseOpcode({ "ampeg_delay", "-101" });
        region.parseOpcode({ "ampeg_hold", "-101" });
        region.parseOpcode({ "ampeg_release", "-101" });
        region.parseOpcode({ "ampeg_start", "-101" });
        region.parseOpcode({ "ampeg_sustain", "-101" });
        region.parseOpcode({ "ampeg_depth", "-101" });
        region.parseOpcode({ "ampeg_vel2attack", "-101" });
        region.parseOpcode({ "ampeg_vel2decay", "-101" });
        region.parseOpcode({ "ampeg_vel2delay", "-101" });
        region.parseOpcode({ "ampeg_vel2hold", "-101" });
        region.parseOpcode({ "ampeg_vel2release", "-101" });
        region.parseOpcode({ "ampeg_vel2sustain", "-101" });
        region.parseOpcode({ "ampeg_vel2depth", "-101" });
        REQUIRE(region.amplitudeEG.attack == 0.0f);
        REQUIRE(region.amplitudeEG.decay == 0.0f);
        REQUIRE(region.amplitudeEG.delay == 0.0f);
        REQUIRE(region.amplitudeEG.hold == 0.0f);
        REQUIRE(region.amplitudeEG.release == 0.0f);
        REQUIRE(region.amplitudeEG.start == 0.0f);
        REQUIRE(region.amplitudeEG.sustain == 0.0f);
        REQUIRE(region.amplitudeEG.depth == 0); // ignored for ampeg
        REQUIRE(region.amplitudeEG.vel2attack == -100.0f);
        REQUIRE(region.amplitudeEG.vel2decay == -100.0f);
        REQUIRE(region.amplitudeEG.vel2delay == -100.0f);
        REQUIRE(region.amplitudeEG.vel2hold == -100.0f);
        REQUIRE(region.amplitudeEG.vel2release == -100.0f);
        REQUIRE(region.amplitudeEG.vel2sustain == -100.0f);
    }

    SECTION("ampeg_XX_onccNN")
    {
        // Defaults
        REQUIRE(!region.amplitudeEG.ccAttack);
        REQUIRE(!region.amplitudeEG.ccDecay);
        REQUIRE(!region.amplitudeEG.ccDelay);
        REQUIRE(!region.amplitudeEG.ccHold);
        REQUIRE(!region.amplitudeEG.ccRelease);
        REQUIRE(!region.amplitudeEG.ccStart);
        REQUIRE(!region.amplitudeEG.ccSustain);
        //
        region.parseOpcode({ "ampeg_attack_oncc1", "1" });
        region.parseOpcode({ "ampeg_decay_oncc2", "2" });
        region.parseOpcode({ "ampeg_delay_oncc3", "3" });
        region.parseOpcode({ "ampeg_hold_oncc4", "4" });
        region.parseOpcode({ "ampeg_release_oncc5", "5" });
        region.parseOpcode({ "ampeg_start_oncc6", "6" });
        region.parseOpcode({ "ampeg_sustain_oncc7", "7" });
        REQUIRE(region.amplitudeEG.ccAttack);
        REQUIRE(region.amplitudeEG.ccDecay);
        REQUIRE(region.amplitudeEG.ccDelay);
        REQUIRE(region.amplitudeEG.ccHold);
        REQUIRE(region.amplitudeEG.ccRelease);
        REQUIRE(region.amplitudeEG.ccStart);
        REQUIRE(region.amplitudeEG.ccSustain);
        REQUIRE(region.amplitudeEG.ccAttack->first == 1);
        REQUIRE(region.amplitudeEG.ccDecay->first == 2);
        REQUIRE(region.amplitudeEG.ccDelay->first == 3);
        REQUIRE(region.amplitudeEG.ccHold->first == 4);
        REQUIRE(region.amplitudeEG.ccRelease->first == 5);
        REQUIRE(region.amplitudeEG.ccStart->first == 6);
        REQUIRE(region.amplitudeEG.ccSustain->first == 7);
        REQUIRE(region.amplitudeEG.ccAttack->second == 1.0f);
        REQUIRE(region.amplitudeEG.ccDecay->second == 2.0f);
        REQUIRE(region.amplitudeEG.ccDelay->second == 3.0f);
        REQUIRE(region.amplitudeEG.ccHold->second == 4.0f);
        REQUIRE(region.amplitudeEG.ccRelease->second == 5.0f);
        REQUIRE(region.amplitudeEG.ccStart->second == 6.0f);
        REQUIRE(region.amplitudeEG.ccSustain->second == 7.0f);
        //
        region.parseOpcode({ "ampeg_attack_oncc1", "101" });
        region.parseOpcode({ "ampeg_decay_oncc2", "101" });
        region.parseOpcode({ "ampeg_delay_oncc3", "101" });
        region.parseOpcode({ "ampeg_hold_oncc4", "101" });
        region.parseOpcode({ "ampeg_release_oncc5", "101" });
        region.parseOpcode({ "ampeg_start_oncc6", "101" });
        region.parseOpcode({ "ampeg_sustain_oncc7", "101" });
        REQUIRE(region.amplitudeEG.ccAttack->second == 100.0f);
        REQUIRE(region.amplitudeEG.ccDecay->second == 100.0f);
        REQUIRE(region.amplitudeEG.ccDelay->second == 100.0f);
        REQUIRE(region.amplitudeEG.ccHold->second == 100.0f);
        REQUIRE(region.amplitudeEG.ccRelease->second == 100.0f);
        REQUIRE(region.amplitudeEG.ccStart->second == 100.0f);
        REQUIRE(region.amplitudeEG.ccSustain->second == 100.0f);
        //
        region.parseOpcode({ "ampeg_attack_oncc1", "-101" });
        region.parseOpcode({ "ampeg_decay_oncc2", "-101" });
        region.parseOpcode({ "ampeg_delay_oncc3", "-101" });
        region.parseOpcode({ "ampeg_hold_oncc4", "-101" });
        region.parseOpcode({ "ampeg_release_oncc5", "-101" });
        region.parseOpcode({ "ampeg_start_oncc6", "-101" });
        region.parseOpcode({ "ampeg_sustain_oncc7", "-101" });
        REQUIRE(region.amplitudeEG.ccAttack->second == -100.0f);
        REQUIRE(region.amplitudeEG.ccDecay->second == -100.0f);
        REQUIRE(region.amplitudeEG.ccDelay->second == -100.0f);
        REQUIRE(region.amplitudeEG.ccHold->second == -100.0f);
        REQUIRE(region.amplitudeEG.ccRelease->second == -100.0f);
        REQUIRE(region.amplitudeEG.ccStart->second == -100.0f);
        REQUIRE(region.amplitudeEG.ccSustain->second == -100.0f);
    }
}